System Design in Coating Board Production: D-Type Hydrapulper Guide | Leizhan

System Design in Coating Board Production

The D-Type Hydrapulper plays a critical role in modern coating board production lines. With specifications of 200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t, this equipment directly contributes to reducing water consumption by 15-20%. Proper selection and sizing ensure optimal performance across the full production capacity range.

Key Technical Parameters

200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t. These specifications define the equipment’s operating window — mills should match these parameters to their specific production requirements with 15-20% headroom for peak demand periods.

How D-Type Hydrapulper Impacts System Design

When properly integrated into a coating board line, the D-Type Hydrapulper delivers measurable improvements in reducing water consumption by 15-20%. Mills upgrading to this technology typically see return on investment within 12-18 months through reduced operating costs and improved product quality.

FAQ

How do I select the right D-Type Hydrapulper for my coating board line?

Key specifications to evaluate: 200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t. Always match equipment capacity to your design throughput, not current production, to allow for future expansion.

What maintenance schedule is recommended?

Inspect critical wear components every 3-6 months. Replace wear parts at 12-18 month intervals for optimal performance. Annual comprehensive inspection recommended during scheduled shutdown.

📧 leizhanequipment@gmail.com