Pressure Screen Selection Guide for OCC and Deinked Pulp | Leizhan

Pressure Screen Selection Guide for OCC and Deinked Pulp

Kraft Liner mills face the same challenge: reducing energy costs by 15-20% annually while maintaining product quality. The Pressure Screen MZS Series addresses this directly, with specifications of 80-800 TPD, 0.15-0.50mm slots, fiber recovery >95%, feed consistency 0.8-1.5%.

Key Technical Parameters

80-800 TPD, 0.15-0.50mm slots, fiber recovery >95%, feed consistency 0.8-1.5%. These numbers define the operating window — match them to your production target with 15-20% headroom for peak demand.

How It Works

The Pressure Screen MZS Series delivers reducing energy costs by 15-20% annually through optimized mechanical design. Mills upgrading to this technology typically see return on investment within 12-18 months through lower operating costs and improved output quality.

FAQ

How do I select the right Pressure Screen MZS Series for my kraft liner line?

Key specifications to evaluate: 80-800 TPD, 0.15-0.50mm slots, fiber recovery >95%, feed consistency 0.8-1.5%. Match equipment capacity to your design throughput, not current production, to allow for future expansion.

What maintenance schedule is recommended?

Inspect critical wear components every 3-6 months. Replace wear parts at 12-18 month intervals for optimal performance. Annual comprehensive inspection recommended during scheduled shutdown.

📧 leizhanequipment@gmail.com