D-Type Hydrapulper vs Drum Pulper: Which Saves More Energy Per Ton | Leizhan

D-Type Hydrapulper vs Drum Pulper: Which Saves More Energy Per Ton

Coating Board mills face the same challenge: cutting maintenance downtime by 30% while maintaining product quality. The D-Type Hydrapulper addresses this directly, with specifications of 200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t.

Key Technical Parameters

200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t. These numbers define the operating window — match them to your production target with 15-20% headroom for peak demand.

How It Works

The D-Type Hydrapulper delivers cutting maintenance downtime by 30% through optimized mechanical design. Mills upgrading to this technology typically see return on investment within 12-18 months through lower operating costs and improved output quality.

FAQ

How do I select the right D-Type Hydrapulper for my coating board line?

Key specifications to evaluate: 200-600 TPD, 4-6% consistency, 132-500 kW, helical rotor design, energy 8-12 kWh/t. Match equipment capacity to your design throughput, not current production, to allow for future expansion.

What maintenance schedule is recommended?

Inspect critical wear components every 3-6 months. Replace wear parts at 12-18 month intervals for optimal performance. Annual comprehensive inspection recommended during scheduled shutdown.

📧 leizhanequipment@gmail.com